A type | Switch |
Ports | 48 x 10/100/1000Base-T |
1 Console Port | |
4 x SFP+ | |
Switch Type | - |
Number of ports | 52 (48x10/100/1000Base-T Ports + 4x1G/10G Base-X SFP Plus) |
A type | Switch |
Ports | 48 x 10/100/1000Base-T |
1 Console Port | |
4 x SFP+ | |
Switch Type | - |
Number of ports | 52 (48x10/100/1000Base-T Ports + 4x1G/10G Base-X SFP Plus) |
Switching matrix | 176 Gbit/sec (комутація портів) |
Jumbo frames | 10000 byte |
Packet transmission rate | 132 mil.pack./sec |
FLASH-memory | 256 MB |
Max. Power Consumption | 44 W |
RAM memory | 512 MB |
Stacking | up to 9 devices |
Control | Command Line Interface (CLI) |
LLDP | |
VCT System Diagnostics | |
LLDP-MED | |
sFlow | |
System log | |
IMC - Intelligent Management Center | |
NTP | |
RMON | |
telnet | |
Loopback Detection | |
Functions | Port Mirroring |
ARP | |
Routing statistics | |
DHCP | |
OSPF | |
Flow Mirroring | |
IPv4 routing | |
IGMP v1, v2, v3 | |
MLD v1/v2 Snooping | |
RIPng | |
IGMP v1/v2/v3 Snooping | |
RSTP | |
STP | |
MSTP | |
IPv6 routing | |
RIP | |
Security | IEEE 802.1x |
Port safety | |
SSH | |
Port isolation (secure ports) | |
HTTPS | |
HWTACACS | |
hierarchical user management | |
VLAN | VLAN based on MAC address |
QinQ |
Additional Features | EEE802.3x flow control |
Operating humidity | from 10% to 90% |
Operating temperature | from 0 to 45º C |
Dimensions, mm | 43.6×440×230 |
The weight | 3.5 g |
Warranty | 12 months |
High scalability
IPV6 features
The S5560S-SI switch series comes with IPv4/IPv6 dual-stack platform which provides hardware- based IPv4/IPv6 wire-speed forwarding and IPv4/IPv6 Layer 3 routing protocols. It also supports IPV6-based ACL, QOS, multicasting and NMS that can help the network upgrade from IPV4 to IPV6.
H3C S5560S-SI switch series is pre-built with Intelligent Resilient Framework 2 (IRF2). IRF2
provides the following benefits:
Comprehensive security control policies
Abundant QoS policies
The S5560S-SI switch series supports packet filtering at Layer 2 through Layer 4, and traffic classification based on source MAC addresses, destination MAC addresses, source IP addresses, destination IP addresses, TCP/UDP port numbers, protocol types, and VLANs. It supports flexible queue scheduling algorithms based on ports and queues, including strict priority (SP), weighted round Robin (WRR) and SP+WRR. The S5560S-SI switch series enables committed access rate (CAR) with the minimum granularity of 8 kbps. It supports port mirroring in the outbound and inbound directions, to monitor the packets on the specific ports, and to mirror the packets to the monitor port for network detection and troubleshooting.
Excellent manageability
The H3C S5560S-SI switch series makes switch management with ease with the support of SNMPv1/v2/v3, which can be managed by NM platforms, such as Open View and iMC. With CLI and Telnet switch management is made easier. And with SSH 2.0 encryption, switch management security is enhanced.
High Availability
The switch offers the following hardware high availability features:
In addition to hardware redundancy, the switch provides a variety of node and link redundancy and protection mechanisms, including: