Device type | online with double conversion |
Mounting type | classic (tower) |
Input voltage range | 110-176 V /лінійне зниження характеристик між 50% та 100% навантаження |
176-288 V /без погіршення характеристик | |
Max. Output Power | 10000 VA |
Effective Output Power | 10000 V |
Established batteries | 16 pcs x 12B 9 Aг |
Protection | Short circuit protection |
Overload protection | |
overvoltage protection | |
discharge/overcharge protection /перевірки вентилятора | |
IP 20 | |
Dimensions ( HxWxD ) | 711 x 191 х 495 mm |
The weight | 62 kg |
Device type | online with double conversion |
Mounting type | classic (tower) |
Typical recharge time (up to 90%) | 9 h |
THDi | ≤ 5% |
КНИ | ≤ 1% /linear load |
≤ 4% /non-linear load |
Input | Single-phase three-wire (1F + N + PE) |
Input voltage range | 110-176 V /лінійне зниження характеристик між 50% та 100% навантаження |
176-288 V /без погіршення характеристик | |
Input frequency | 40-70 /автоматичне визначення |
Peak current | 1 A |
Output | Single-phase three-wire (1F + N + PE) |
Output voltage | 220 V |
230 V | |
240 V | |
208 V | |
Max. Output Power | 10000 VA |
Effective Output Power | 10000 V |
Output frequency | 50-60 /± 0,1% Гц у режимі роботи від батареї |
Type of output power | Terminal block |
Established batteries | 16 pcs x 12B 9 Aг |
Overload | 105% - 110% for 10 min |
110% - 125% for 1 min | |
> 126% - 150% for 30 s | |
Efficiency | ≥ 94% at 100% load |
max. 95% at 60% load | |
≥ 98% in ECO mode | |
Connecting an external battery | 16 шт x 12B 9 Aг |
Protection | Short circuit protection |
Overload protection | |
overvoltage protection | |
discharge/overcharge protection /перевірки вентилятора | |
IP 20 |
Interface | USB |
RS-232 | |
optional SNMP adapter | |
Additional information | microprocessor control |
ECO mode |
Display | LCD |
Noise level | 58 dB |
Operating temperature | 0-40 °C |
Relative humidity | 0-95% (non-condensing) |
Colour | black |
Dimensions ( HxWxD ) | 711 x 191 х 495 mm |
Battery warranty | 1 year (2 роки на електроніку) |
The weight | 62 kg |
Warranty | 12 months |
Width | 300 mm |
Height | 910 mm |
Length | 700 mm |
Weight | 72.20 kg |
Volume | 0.1911 m3 |
The operation principle is that the input AC voltage is converted by the rectifier into DC, and then by the inverter – back into AC. Even in the presence of large deviations in the input voltage, 2E UPS continues to supply the connected devices with a pure sinusoidal stabilized voltage. The lack of switching between modes (mains to battery) allows to minimize the risk of damage to «sensitive» equipment. In particular, such UPSs are used for uninterrupted power supply of medical equipment, for data centers and enterprises with a continuous production cycle. The input voltage range is: 110 ~ 176 VAC (linear derating between 50% and 100% load); 176 ~ 288 VAC (no degradation). Input: single-phase three-wire (1F + N + PE). Output: single-phase three-wire (1F + N + PE), in addition, it is possible to adjust the voltage 208/220/230/240 V.
The operating frequency range of 2E SD10000 model is within 40 ~ 70 Hz (automatic detection). The UPS is equipped with sixteen batteries (12 Bt/9 Ah), which restore the charge to 90% in just 9 hours! The charging current (max.) is 1 A. In addition, various RS-232, USB and an optional SNMP adapter are provided. A multi-function LCD display built into the front panel displays the device’s operating status, including error codes.
With a weight of 62 kg, the device has dimensions of 191 × 495 × 711 mm. Installation type: TOWER. The noise level is 58 dB. The product has IP20 protection degree, as well as protection against short circuit, overload, overheating, full battery discharge and fan check ability.