Home - Products & Solutions for Enterprises - Network Equipment - Switches - Netis - P110C Switch 8xFE PoE, 2xFE, unmanaged

Netis P110C Switch 8xFE PoE, 2xFE, unmanaged

SKU: P110C

Description Additional

Download

Technical characteristics Netis P110C Switch 8xFE PoE, 2xFE, unmanaged:

Main features

Full list of features

A type	Switch
Ports	8 x 10/100 Mbps
Switch Type	unmanaged

Main

A type	Switch
Ports	8 x 10/100 Mbps
Switch Type	unmanaged
Data transfer rate	Ethernet: 10 Mbps (half duplex) / 20 Mbps (full duplex)
	Fast Ethernet: 100 Mbps (half duplex) / 200 Mbps (full duplex)

Performance

Switching matrix	2 Gbit/sec
MAC Address Table	2 k
Jumbo frames	2048 byte

Functional

Standards and Protocols	IEEE 802.3x Flow Control
	IEEE 802.3 10BASE-T Ethernet
	IEEE 802.3u 100BASE-TX Fast Ethernet
	IEEE 802.3i 10BASE-T Ethernet
	IEEE 802.3af/at, Power over Ethernet
Functions	802.3x Flow Control
	IEEE 802.3
	IEEE 802.3u

Physical

Operating humidity	from 10% to 90%
Storage humidity	from 5% to 90%
Operating temperature	from 0 to 40 °C
Storage temperature	from -40 to 70 °C
Dimensions, mm	190 x 140 x 43

Warranty

24 months

Package dimensions

Width	210 mm
Height	60 mm
Length	200 mm
Weight	1.14 kg
Volume	0.0025 m3

The 10-port unmanaged Netis P110C Fast Ethernet switch (8x PoE+ ports) is an excellent solution for creating a home or office network. Compatibility with PoE cameras, WiFi access points and other equipment, including those without PoE support for data transmission over the network. All 8 RJ45 ports (with a speed of 10/100 Mbps) support power over Ethernet (PoE+) technology. The device automatically recognizes and supplies power to equipment supporting IEEE 802.3af and IEEE 802.3at standards, for example, PoE access points, IP phones, IP cameras, etc. At the same time, power and data are transmitted over the same cable, that allows you to connect new devices to the network, located far from the mains or sockets.

487000 UZS*

in stock

* Recommended retail price

Description of Netis P110C Switch 8xFE PoE, 2xFE, unmanaged

Supporting 802.3 Ethernet, 802.u Faster Ethernet；
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-long
transmission)
Ports 1~8 features POE power supply capability and can be used as Power over
Ethernet devices；
Auto MDI/MDIX crossover for all ports
Support full duplex based on IEEE802.3x and half duplex based on Backpressure
Support non-blocking wire speed forwarding
MAC address auto-learning & auto-aging
Steel case，the total POE power budget of 100 W
Just Plug and Play

Images of Netis P110C Switch 8xFE PoE, 2xFE, unmanaged